客户案例

news

Audio manufacturers teach you the proper maintenance of audio

Your current location: Home >> News >> Company news

Audio manufacturers teach you the proper maintenance of audio

Date of release:2019-06-17 Author: Click:

Sound quality is very reliable, but its service life and maintenance have a great relationship, if the correct use and proper maintenance of a set of quality can ensure that the sound can be used for many years, and can consistently maintain good sound quality and sound effects. Below, small make up to introduce the correct sound maintenance method.

Audio manufacturers teach you the correct maintenance of audio!

音响厂家教你正确保养音响

1. As most audio manufacturers use wood to make boxes, so it should be placed in a dry room and avoid direct sunlight as far as possible. If the environment is damp, moisture-proof drying should be carried out in time to prevent the board of boxes from being inflated by tide.

2. Long-term unused audio, material will appear static fatigue, the frequency divider in non-polar electrolytic capacitor leakage, so, to maintain the sound can not be used for a long time, but should be used at least two or three times a month and each time for more than an hour, to avoid the impact of static fatigue on the sound.

3. Pay special attention to the speaker unit when maintaining the stereo, and clean it regularly. The horn unit can be carefully removed and in the case and the horn with an oily pen to mark the location, in order to maintain good reset installation. After removing the horn unit, can use imported car wax evenly spread on the upper and lower layers of magnetic steel T iron, can effectively prevent the horn unit from being corroded.

4. If the paper basin of the stereo system appears mildew spots and white spots, then you can use a semi-wet medical alcohol cotton ball to wipe it carefully and quickly from the back, and pay attention to avoid infiltration into the sound basin surface. If there are mildew spots and white spots on the sound basin surface, then you can only use warm boiled water and a few drops of hand sanitizer, and use a clean soft towel to dip into the water and wipe it dry.

This is the correct way to maintain sound. Sound technology development has been very mature, its principle is not very complex, many music enthusiasts have a certain common sense, so, we should be very aware of the correct maintenance of the importance of sound. Therefore, when we start with a set of professional audio, we must cherish, the correct use of correct maintenance.

The address of this article:http://en.mxdsz.cn/news/390.html

Key word:Whosthebestaudiomanufacturer,Whatdoestheaudiomanufacturerhave,Howdoaudiomanufacturerschoose

Recently browse: